|
[Sponsors] |
July 29, 2005, 09:45 |
Euler model
|
#1 |
Guest
Posts: n/a
|
hi,
Fluent manual states that the Eulerian multiphase model in FLUENT allows for the modeling of multiple separate. Does anybody know whether it is possible to define different boundary conditions for each of the phases in Fluent? For example, to simulate a separation process through a sieve, can I no-flux condition for one phase and flux condition for the other? Many thanks! |
|
July 29, 2005, 18:46 |
Re: Euler model
|
#2 |
Guest
Posts: n/a
|
Yes, it is. When u define more than one phase you would see the choices, phase 1, phase 2 , mixture etc. You can set different boundary conditions for each phase.
|
|
August 1, 2005, 12:22 |
Re: Euler model
|
#3 |
Guest
Posts: n/a
|
thanks for the response.
I wanted to set porous jump for phase 1 (water) and wall for phase 2 (solid particles). However, under boundary condition, the choices (under Type) available for mixture are interior and wall, while only porous jump BC is available for phase 1 and 2. I don't see any other BC choices for phase 1, phase 2 and mixture. What do I need to do to have more choices for BCs. How do I tell Fluent that I need to use the wall BC for phase 2 in this case? UDF perhaps? Thank you very much in advance. |
|
August 1, 2005, 13:43 |
Re: Euler model
|
#4 |
Guest
Posts: n/a
|
Not sure, friend.
|
|
August 9, 2005, 06:25 |
different solid layers
|
#5 |
Guest
Posts: n/a
|
How can I define more than one solid phases in the euler model?
|
|
August 9, 2005, 12:45 |
Re: different solid layers
|
#6 |
Guest
Posts: n/a
|
Under Deine - Multiphase model - number of phases.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
multiphaseInterFoam for RAS turbulence model | chiven | OpenFOAM Bugs | 8 | December 6, 2017 02:08 |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
MRF and Euler model | DropsandSimulations | OpenFOAM Running, Solving & CFD | 0 | September 4, 2009 05:20 |
multi fluid mixture model issue | rystokes | CFX | 3 | August 9, 2009 19:13 |
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model | Jonas Larsson | FLUENT | 5 | March 13, 2000 03:27 |