CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Strip Casting Modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 21, 2005, 01:39
Default Strip Casting Modeling
Can Atli
Posts: n/a

I need to do a solidification modeling for the twin roll casting process. The solidifying metal upon contact with the rolls has a curved trajectory as opposed to a straight path in conventional continuous casting. I am not sure how i can define the transport term in this case. Another problem is, for the molten metal and the roll contact, is it ok to define only a rotating wall with a heat flux?

Thank you for your assistance
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
sand casting quintet Main CFD Forum 1 June 23, 2008 06:35
May Focus Area: Turbulence Modeling Jonas Larsson CFD-Wiki 0 May 2, 2006 11:48
Modeling Flow/Saturation/Absorption in Fibers Gene Dougherty Main CFD Forum 0 June 6, 2003 14:49
Solid Modeling Chris Main CFD Forum 10 July 2, 2002 07:12
CFD Modeling of Two-phase Flow in Small Dia.Tubes Eric Poindexter Main CFD Forum 2 September 22, 2000 09:21

All times are GMT -4. The time now is 12:18.