|
[Sponsors] |
February 24, 2006, 18:39 |
viewpoint
|
#1 |
Guest
Posts: n/a
|
Hi everybody,
This is probably an easy question which I couldn't find the answer for. I created a surface>plane to see a cut through of my model. However, it displays the plane 90 deg. rotated. I had to rotate it by hand, which I end up with losing the angle. Could someone tell me how to set the viewpoint to the defined plane? Thanks in advance. ahmet |
|
February 25, 2006, 12:20 |
Re: viewpoint
|
#2 |
Guest
Posts: n/a
|
Go to Display->Views. Here are some defined views, just double click them. Or to define your own, you can click "Camera" and input things like position, target, up vector, and field. Also, you can turn off 'perspective' in here, which I usually do. I find it easier to move around the model with perspective off.
Hope this helps, and good luck, Jason |
|
February 27, 2006, 11:46 |
Re: viewpoint
|
#3 |
Guest
Posts: n/a
|
thanks Jason, that is exactly what I was looking for.
ahmet |
|
|
|