|
[Sponsors] |
September 24, 2007, 05:51 |
boundary condition
|
#1 |
Guest
Posts: n/a
|
I need your help! my tank is a bubble column,three phase in it.Air bubbles come from the bottom of the column and flow out from the face of the water. How to set the boundary conditions? Especially how to set the outflow boundary? I try to use the pressure-outflow condition,but the result is not compellent. I think perhapse because only air flow out of the system,the water and the granule are still in the tank. I need your help!
|
|
September 25, 2007, 00:53 |
Re: boundary condition
|
#2 |
Guest
Posts: n/a
|
hi,
try axisymmetric model |
|
September 27, 2007, 21:50 |
Re: boundary condition
|
#3 |
Guest
Posts: n/a
|
I changed my boundary,but it still can not converge.I need your help,please.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
Boundary Conditions | Thomas P. Abraham | Main CFD Forum | 20 | July 7, 2013 05:05 |
Setting outlet Pressure boundary condition using CAFFA code | Mukund Pondkule | Main CFD Forum | 0 | March 16, 2011 03:23 |
How exactly the "pressure outlet" bdry condition compute properties on the boundary? | yating9901 | FLUENT | 3 | June 28, 2010 12:26 |
How to set boundary condition in Fluent for the fo | Peiyong | FLUENT | 1 | November 10, 2006 11:44 |