|
[Sponsors] |
January 9, 2008, 08:46 |
Quad-core q6600 64bit
|
#1 |
Guest
Posts: n/a
|
Hi I have a quad-core q6600 64bit (Intel 2.4 GHz), how can I work with all processors at 100% for running simulation in Fluent? Is there some difference for a 64 bit?
Thanks |
|
January 9, 2008, 09:53 |
Re: Quad-core q6600 64bit
|
#2 |
Guest
Posts: n/a
|
If you have a parallel license for Fluent you could try for example the command:
fluent 2ddp -t4 in this way Fluent will use your four processors. What operating system you use ? |
|
January 9, 2008, 09:53 |
Re: Quad-core q6600 64bit
|
#3 |
Guest
Posts: n/a
|
You need the 64-bit version of fluent and you will also have to run in parallel. The user guide talks about running parallel--you would use the -t4 option when you start fluent from command line although you can also do it through the GUI. Incidentally, this also means you need 4 fluent licenses (which is stupid, but that's the way it is).
|
|
January 9, 2008, 15:03 |
Re: i hv pentium D
|
#4 |
Guest
Posts: n/a
|
i hv pentium D ..it has two cores .... what should be the command?
|
|
January 9, 2008, 15:07 |
Re: i hv pentium D
|
#5 |
Guest
Posts: n/a
|
fluent version -t2 This will start two fluent nodes on your machine, one on each core. It also requires two licenses.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
solving a conduction problem in FLUENT using UDF | Avin2407 | Fluent UDF and Scheme Programming | 1 | March 13, 2015 02:02 |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
4 core & 8 core: same 64bit XP, Xeon, x5570, 2.93GHZ | leeruoyun | CFX | 4 | August 19, 2009 00:47 |
Parallel computing quad core | Prad | Main CFD Forum | 13 | February 9, 2009 14:28 |
Questions about CPU's: quad core, dual core, etc. | Tim | FLUENT | 0 | February 26, 2007 14:02 |