CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Help: mesh conversion from Gambit to ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 4, 2008, 11:52
Default Help: mesh conversion from Gambit to ICEM
  #1
sarah_ron2002
Guest
 
Posts: n/a
Dear all,

I have a mesh file (.msh/.cas, dat)generated from Gambit and I'd like to import it into ICEM-cfd. Although I can get the mesh in ICEM, but I don't know how to generate the geometry needed by ICEM. I need to modify the geometry in ICEM. Any help is greatly appreciated.

Best, sarah
  Reply With Quote

Old   April 4, 2008, 17:08
Default Re: Help: mesh conversion from Gambit to ICEM
  #2
hp_c360
Guest
 
Posts: n/a
You could try to covert the mesh to faceted geometry data: Edit-Menue: Mesh -> Facets. Afterwards try to build a diagnostic topology. You should be able to edit the geometry now. But this doesn't work everytime as expected... You want to check your geometry-tolerance in the Settings-Model menu. Good luck!
  Reply With Quote

Old   April 5, 2008, 02:53
Default Thanks a lot! I will try! *NM*
  #3
sarah_ron2002
Guest
 
Posts: n/a
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Problem with Mesh conversion Gambit msh Foam Rachid BANNARI (Bannari) OpenFOAM Meshing & Mesh Conversion 25 September 11, 2011 08:58
Gambit mesh file import into ICEM CFD dev.... FLUENT 2 January 29, 2009 11:37
importing Icem mesh into Gambit srinivas FLUENT 4 December 12, 2008 05:06
ANSYS ICEM CFD Mesh to Gambit Simon Bergström FLUENT 0 January 19, 2007 12:53
gambit icem conversion Tomasz Ochrymiuk FLUENT 2 March 14, 2000 04:02


All times are GMT -4. The time now is 00:45.