|
[Sponsors] |
April 10, 2008, 07:16 |
Joining Meshes in Ansys ICEM CFD
|
#1 |
Guest
Posts: n/a
|
Hello everyone
I am working on a project in which I have to design two passing by ships.I am using Ansys ICEM CFD. Since the geometry is complicated I have designed the two ships separately and and meshed them with small domains. Now I have two cuboid shaped mesh.Then I made a big size domain in which I want to put these ships. Tanker Mesh: Bulk carrier Mesh: Big Domain Mesh: I can translate the meshes and place them in correct position, but still the meshes are not connected. Can any one help me joining these meshes. Thank you for your help. Regards Tava |
|
April 11, 2008, 19:14 |
Re: Joining Meshes in Ansys ICEM CFD
|
#2 |
Guest
Posts: n/a
|
Hi
I am trying to do the analysis by creating 3 different case files and then from Grid>>Zone>>Append Case option I have placed all the parts of the mesh together. I don't know if this is a correct method. If any one have any idea about this please answer. Regards Tava |
|
April 22, 2008, 14:35 |
Re: Joining Meshes in Ansys ICEM CFD
|
#3 |
Guest
Posts: n/a
|
there is a tutorial in ICEMCFD ,u can use that problem,i hope it can gives an idea.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ICEM CFD dealing with bad meshes | James | Main CFD Forum | 3 | January 6, 2009 11:52 |
Importing Meshes from ANSYS | Kieran Hood | CFX | 3 | December 18, 2006 04:53 |
[Other] Ansys meshes | azt | OpenFOAM Meshing & Mesh Conversion | 5 | November 23, 2005 19:39 |
Exporting Meshes from ICEM to Fluent | zi | FLUENT | 4 | August 9, 2005 11:58 |
Hexa meshes with ICEM CFD 5.1 | Tim Guo | CFX | 8 | June 29, 2005 10:27 |