CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Pressure drop trend phyiscal not correct in t pipe

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 4, 2008, 02:43
Default Pressure drop trend phyiscal not correct in t pipe
Posts: n/a
I am soving one problem using Fluent. Porblem descrption: There is a oil flow in T pipe. One inlet & 2 outlets. Both outlets are near to each other. I defined velocity inlet at inlet and pressure outlet at on e outlet and velocity inlet with -ve value at another outlet. I want to see the pressure drop for different flow distribution at outlet to calculate loss coefficients.I ran case with different flow distribution at outlet. When I look into results, pressure drop decreases with increasing flow rate at one outlet. I found there is high recirculation at actual outlet in both port. Actual outlet refer because of outlets are extended to avoid reverse flow. If somebody found the similar trends and know the reason why this is happen. Please share your vies with me.

Thanks in advance.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure drop in a pipe mark FLUENT 7 April 1, 2016 12:51
how to define pressure drop formula in a pipe Yessica Pomarinni FLUENT 2 August 31, 2007 11:09
Pressure Drop - Please Help - Simple Pipe Flow Joe A. FLUENT 2 April 23, 2007 07:50
measure the pressure drop ( gradient ) in a pipe? dalizi Siemens 1 June 9, 2006 02:22
pressure drop within a pipe Liouskos Jiannis Phoenics 5 February 6, 2002 13:04

All times are GMT -4. The time now is 23:47.