|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Debashis Maji
Join Date: Mar 2009
Location: Kharagpur, West Bengal, India
Posts: 4
Rep Power: 16 ![]() |
Hi all,
I am trying to simulate a very basic model, involving a solid heater over a solid block and a fluid flowing over the heater. I want to simulate the heat dissipation as conduction through the lower solid block and that as convection and conduction through the above fluid. I tried to solve it in 2D with only the fluid present and the heater & I am getting results, but when i am doing the 3D analysis, i am getting only the conduction results (straight heat distribution).... not the convection one, i.e. heat distribution (the heat flow bend) along flow direction.. Has anybody got similar problems before? Please let me know if u had so... Your help is highly appreciated... plz let me know if there are any specific settings for it..... Thanks in advance. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
ilyas Khurshid
Join Date: Jun 2009
Posts: 1
Rep Power: 0 ![]() |
Hi debashis
i am working on the same problem in 2-d as you mention you get result in 2d.i will be glad if you help me.how you get the results. basically i am using fluent and the result of convection looks wrong. as in my simualtion heat transfers from solid to liquid and never transfers from liquid to solid.i look forward for you assistance. thanks in anticipation. |
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Continuous casting simulation problem | luke.christ | FLUENT | 6 | November 24, 2020 07:14 |
Heat conduction and convection simulation | debashis | OpenFOAM Running, Solving & CFD | 5 | March 23, 2014 23:28 |
Need a help concerning a pure convection problem | happysmile | Main CFD Forum | 6 | July 8, 2009 13:24 |
SIMULATION OFNATURAL CONVECTION :WAVY CHANNEL (2D) | AKI | FLUENT | 7 | January 17, 2009 19:12 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |