|
[Sponsors] |
July 11, 2009, 06:54 |
room simulation
|
#1 |
New Member
Join Date: Jul 2009
Posts: 1
Rep Power: 0 |
im trying to model patient room using fluent. I defined patients as wall with constant temp. I got cosntanat temp. distribution in the interriors (equal to inlet air temperature) except very near the boundry of walls and patients.
IS it right ???? Is the air turbulent inside the room ? |
|
July 11, 2009, 19:37 |
|
#2 |
New Member
Luk
Join Date: Jun 2009
Posts: 24
Rep Power: 17 |
There is an unsufficient amount of informations about this project...
The purpose, BC, solver type - steady or time-depended... If you have an open room (open window, air conditioning), there will be a forced convection (according to the velocity of air), and the heat transfer will be hardly to notice (depend of conditions of air flux). If closed room with still air, there should be a natural convection i.e. warm air goes up, cold fall. I would not expected miracles from this type of problem... If we have a surrounding air temperature near 27C and couple of people with 36C... There is only 9C disparity.
__________________
******************************* |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fire simulation in Steckler room | Per Burström | CFX | 2 | March 27, 2007 20:01 |
Simulation of Ahu room flow distribution | Donny R | Main CFD Forum | 0 | October 20, 2003 01:40 |
examples of simulation on room ventilation? | lei | FLUENT | 1 | June 20, 2003 23:38 |
questions about room fire simulation | Junyan | FLUENT | 0 | June 27, 2002 22:50 |
Question concerning about the flow simulation of a fan in an engine room. | ghlee | Main CFD Forum | 3 | October 21, 1998 08:05 |