CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh motion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 6, 2009, 03:15
Default mesh motion
  #1
New Member
 
abdul samad
Join Date: Aug 2009
Posts: 14
Rep Power: 17
samad87 is on a distinguished road
i'm carrying out aero-acoustic analysis to engine turbine...
the single stage 2-d case went well but while i ws doin the multisatge(2-stages) case a strange problem appeared...
the first rotor which had interfaces on both sides started moving in the x-direction once i previewed the mesh motion....i ws using the sliding mesh approach n had given the velocity only in -y direction...the second rotor however showed the normal motion....
i hv tried numerous things including emtying the domain (removing the stators n rotors), then changing teh mesh from pave to map,still teh motion is x-axis motion is thre.....the interesting thing is tht the problem is thre even b4 iterating the file for solution........
desparately need help
samad87 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic moving mesh Pei-Ying Hsieh (Hsieh) OpenFOAM Running, Solving & CFD 64 June 7, 2012 10:04
Fixed mesh method for rigid body motion philippose OpenFOAM 1 January 12, 2009 04:57
mesh motion Mark CFX 1 October 14, 2008 21:52
General question regarding Fluent 6.3s mesh motion AndyRoth FLUENT 0 December 8, 2006 12:01
problem with Mesh motion, please help me! Giuliano FLUENT 2 November 17, 2006 02:44


All times are GMT -4. The time now is 10:18.