CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Boundary profile for porous media coefficients

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 28, 2010, 09:45
Default Boundary profile for porous media coefficients
  #1
New Member
 
Franz Roman
Join Date: Jun 2009
Posts: 28
Rep Power: 17
franzdrs is on a distinguished road
Hi,
I would like to know if it is possible to use a Bou
ndary Profile to define the resistance coefficients of the Porous Zone. I am reading the Fluent users manual but dont find a clear explanation. At one point under "Using Boundary Profiles", the manual says: "Boundary profiles cannot be used to define volumetric source terms. If you want to define a non-constant source term, you will need to use a user-defined function." Do the porous media coefficients fall under the category of volumetric source terms?
I would thank any help or comment.
Regards,
Franz
franzdrs is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using a boundary profile file with unsteady, spatially varying data jonnythewlis FLUENT 0 December 8, 2009 16:49
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Create Boundary Profile Ir.Nik FLUENT 0 April 21, 2007 09:48
Problems with Boundary Profile hermann FLUENT 1 March 2, 2005 13:00
Boundary Profile Alamgir FLUENT 2 October 28, 2003 21:13


All times are GMT -4. The time now is 02:32.