How to get TUI journal

ringtail · July 15, 2010, 11:06

hi, everybody

I just get GUI journal, when I operate FLUENT through GUI and write journal. I want to know how i could get the TUI journal. Usually TUI journal is brief than GUI jouranl, and it do not record GUI operation.

thanks

Krish · July 15, 2010, 12:42

Hello mate, you have to make another TUI journal file.

Start Fluent in TUI mode:

"fluent 2ddp -g -i"

Then:

"file"
"start-journal"

It will ask you to confirm the name of the journal file and it will start recording.

When you finished go to:

"file"
"stop-journal"

Hope this helps.

Krish

ringtail · July 16, 2010, 03:26

Quote:

Originally Posted by Krish

Hello mate, you have to make another TUI journal file.

Start Fluent in TUI mode:

"fluent 2ddp -g -i"

Then:

"file"
"start-journal"

It will ask you to confirm the name of the journal file and it will start recording.

When you finished go to:

"file"
"stop-journal"

Hope this helps.

Krish

Hi Krish, thanks for your reply.
I have tried what you have mentioned. And I find that the journal will be recorded in TUI model only when I operate FLUENT through text command prompt window in TUI model. If I operate FLUENT through GUI, the journal will be GUI format which every sentence has a prefix of "cx-gui-do".

MY question is :
How could I get the TUI journal when I operate FLUENT throuhg GUI?
I am not familiar with Text command, but I wanna a journal with text command.

thanks very much.

Krish · July 16, 2010, 06:04

Hello mate, your right, a TUI journal will only work in TUI mode and vice versa.

I have no idea how you would convert one to the other.

I came across this problem and just changed over to TUI mode. Its exactly the same just without a GUI interface.

What I did was write down each step I took and then just worked from TUI mode.

If your familiar with how to setup your model, you don't even need to write the steps.

Someone might know if there is a way to convert journals from TUI to GUI but I was unable to find anything.

Good luck

Krish

wadebogs · July 18, 2010, 08:41

Hi there, just record a journal but do all of the setup using tui commands. Don't worry if u get things a bit wrong. At the end just open the recorded Jou file in a text editor and delete any GUI commands and mistakes to clean your file up.

ringtail · July 18, 2010, 11:51

It seems the unique method of recording TUI journal is to operate FLUENT using TUI commands.

Thanks for help.

July 15, 2010, 11:06	How to get TUI journal	#1
ringtail Member Join Date: Dec 2009 Location: China Posts: 79 Rep Power: 16	hi, everybody I just get GUI journal, when I operate FLUENT through GUI and write journal. I want to know how i could get the TUI journal. Usually TUI journal is brief than GUI jouranl, and it do not record GUI operation. thanks lukasf likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can I convert GUI journal to TUI journal	harry	FLUENT	7	December 4, 2013 16:28
Gambit - Journal programming - Summerize and TUI	Cyril	FLUENT	4	April 19, 2006 06:28
combine Scheme and TUI possible in Fluent Journal?	Qian Zhen	FLUENT	0	November 11, 2005 22:54
help needed about phase change	Yanhu Guo	Main CFD Forum	4	January 23, 2001 23:16
Gambit Journal File Scripts, Public Database Needed?	Jonas Larsson	Main CFD Forum	13	March 2, 1999 07:25

July 15, 2010, 12:42		#2
Krish New Member Krishan Parmar Join Date: Jan 2010 Posts: 7 Rep Power: 16	Hello mate, you have to make another TUI journal file. Start Fluent in TUI mode: "fluent 2ddp -g -i" Then: "file" "start-journal" It will ask you to confirm the name of the journal file and it will start recording. When you finished go to: "file" "stop-journal" Hope this helps. Krish

July 16, 2010, 06:04		#4
Krish New Member Krishan Parmar Join Date: Jan 2010 Posts: 7 Rep Power: 16	Hello mate, your right, a TUI journal will only work in TUI mode and vice versa. I have no idea how you would convert one to the other. I came across this problem and just changed over to TUI mode. Its exactly the same just without a GUI interface. What I did was write down each step I took and then just worked from TUI mode. If your familiar with how to setup your model, you don't even need to write the steps. Someone might know if there is a way to convert journals from TUI to GUI but I was unable to find anything. Good luck Krish

July 18, 2010, 08:41		#5
wadebogs New Member Join Date: Jul 2009 Posts: 16 Rep Power: 16	Hi there, just record a journal but do all of the setup using tui commands. Don't worry if u get things a bit wrong. At the end just open the recorded Jou file in a text editor and delete any GUI commands and mistakes to clean your file up.

July 18, 2010, 11:51		#6
ringtail Member Join Date: Dec 2009 Location: China Posts: 79 Rep Power: 16	It seems the unique method of recording TUI journal is to operate FLUENT using TUI commands. Thanks for help.