CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

gas solid flow problem validation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 27, 2010, 06:05
Default gas solid flow problem validation
  #1
New Member
 
PP
Join Date: Jul 2010
Posts: 9
Rep Power: 15
pandaba is on a distinguished road
I am simulating the gas solid flow problem using Fluent. The problem is converging nicely. But I am not able to match the results with experimental results. If some one had worked in this area, please advise me for improvement.

Thanks
PP
pandaba is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 05:21
heat conduction in solid and convection in flow kunal FLUENT 3 February 29, 2012 04:42
Flow not moving - Supersonic/Initial Pressure problem? shankara.2 FLUENT 0 June 9, 2009 20:49
Periodic flow boundary condition problem sudha FLUENT 3 April 28, 2004 08:40
Problem on boundry of two phase flow youngan CFX 0 June 30, 2003 02:32


All times are GMT -4. The time now is 09:08.