|
[Sponsors] |
January 20, 2011, 13:59 |
Flow bench simulation
|
#1 |
New Member
Justas
Join Date: Jan 2011
Posts: 1
Rep Power: 0 |
Hello,
I am new in this forum and seeking help with my assignment. I have done flow bench testing of a cylinder head. I have some experience with CFX and FLUENT also i have a design of my intake port. Problem is that whenever i flow my cylinder head in FLUENT i never get same mass flow rate results as with the real test. I am applying 0 pressure on input boundary, 6220 on output and they all operate at 1atm pressure. I tried it with laminar and k-epsilon models but always get the same flow value of ~0.5 kg/s. The actual intake port value is ~ 45.59 L/s. Could any one help me and tell me what am I doing wrong? Thank you |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Domain format problem on airfoil flow simulation | andrenonaka | CFX | 14 | December 7, 2015 00:42 |
Channel flow setup in Large-eddy simulation | Weihua | Main CFD Forum | 6 | November 17, 2015 09:33 |
Multiphase flow - simulation crashing | yschati | CFX | 14 | November 16, 2010 17:29 |
Natural convection - Inlet boundary condition | max91 | CFX | 1 | July 29, 2008 20:28 |
About unsteady flow simulation | Ji | Fidelity CFD | 3 | June 10, 2003 10:04 |