|
[Sponsors] |
February 2, 2012, 01:28 |
dynamic mesh
|
#1 |
New Member
Kim Donghee
Join Date: May 2009
Posts: 15
Rep Power: 17 |
Hi there
i want to simulate like piston movement! as shown in attached file, center line moves upward as time goes. i used dynamic mesh(smoothing&remeshing). so, center line moves well, but, does not working remesh function. just move center line upward. therefore, when center line arrive adjacent cell(i.e, adjacent upper cell), show error message: Negative cell volume. please help me. I'm just trying to studying dynamic mesh. it's very simple problem, i think. Ah, I also use UDF(CG_MOTION) Thank you all. Have nice day |
|
February 2, 2012, 03:36 |
|
#2 |
Senior Member
|
Hi,
The best dynamic mesh technique for this purpose is "layaring". but if you insist on using smoothing, you have to enable it from TUI for all the cell types; additionally, I don't think that the quad elements can be remeshed. Bests,
__________________
Amir |
|
February 2, 2012, 04:17 |
|
#3 |
New Member
Kim Donghee
Join Date: May 2009
Posts: 15
Rep Power: 17 |
Thanks Amir
i just want to simulate through any method. first of all, i try to layering method however, could you tell me more way to set up? i read manual, but it's really hard to understand. Thank you again. below coding is mine and i hooked up only center line. #include "udf.h" DEFINE_CG_MOTION(butterfly_flex_UDF, dt, cg_vel, cg_omega, time, dtime) { cg_vel[0] = 0.0; cg_vel[1] = 0.1; cg_vel[2] = 0.0; cg_omega[0] = 0.0; cg_omega[1] = 0.0; cg_omega[2] = 0.0; } |
|
February 2, 2012, 04:25 |
|
#4 |
Senior Member
|
Ok, your UDF looks fine. As I said the other methods aren't recommended in such movement. The onlt tip that you have to consider in layering method is just setting the cell height of each dynamic zones from mesh options tab.
Bests,
__________________
Amir |
|
February 2, 2012, 05:53 |
|
#5 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
same topic here >> http://www.cfd-online.com/Forums/ans...ic-engine.html
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
February 4, 2012, 01:40 |
|
#6 |
New Member
Kim Donghee
Join Date: May 2009
Posts: 15
Rep Power: 17 |
Thank you all^^
i solved this problem!! thank you again!! |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic Mesh on Pintle type injector. | herntan | FLUENT | 16 | September 4, 2020 08:27 |
pls help. mesh collapsed with dynamic mesh. | wlt_1985 | FLUENT | 2 | May 7, 2020 10:42 |
Incylinder dynamic mesh with volumetric reaction | mas | FLUENT | 4 | May 3, 2012 10:22 |
dynamic mesh on a hexa grid | Manoj Kumar | FLUENT | 0 | August 21, 2007 07:41 |
Dynamic mesh + grid adapt = Crash! (Files included | BillH | FLUENT | 4 | July 24, 2007 15:31 |