CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > GridPro

Airfoil meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 6, 2017, 16:39
Default Airfoil meshing
  #1
New Member
 
Khaled Ahmad
Join Date: Dec 2015
Posts: 26
Rep Power: 4
kh.aa is on a distinguished road
I am creating a mesh on Pointwise for an airfoil

But here is the problem, The code I am developing works only for structured grids "quadrilateral", also it needs to make a grid inside the airfoil not only outside and that's how I can define the airfoil geometry

So now I need the airfoil to be "quadrilateral", Is it ok to make a small step "2 nodes" at the leading and trailing edge ?

and any ideas for how to make the grid on PointWise, In and Out ?

Thanks
kh.aa is offline   Reply With Quote

Old   September 21, 2017, 10:42
Default
  #2
MUZ
New Member
 
charles badoe
Join Date: Nov 2011
Location: southampton
Posts: 17
Rep Power: 8
MUZ is on a distinguished road
Hi Khaled

Did you have any success with the grid. I have similar issues and will welcome any help

Thanks
MUZ is offline   Reply With Quote

Reply

Tags
airfoil, pointwise, structured

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[gmsh] Vertex numbering is dense KateEisenhower Open Source Meshers: Gmsh, Netgen, CGNS, ... 7 August 3, 2015 10:49
[ANSYS Meshing] Meshing a cavity in an airfoil kashawki ANSYS Meshing & Geometry 2 July 30, 2015 07:21
[ANSYS Meshing] Meshing 3 Element Airfoil mr.rushikumar ANSYS Meshing & Geometry 0 March 1, 2014 22:57
dynamic meshing for 2D airfoil JochemGrietens Mesh Generation & Pre-Processing 4 December 10, 2013 13:13
[GAMBIT] Problematic meshing of an inverted airfoil snkutta ANSYS Meshing & Geometry 2 October 11, 2011 13:23


All times are GMT -4. The time now is 05:12.