CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Hardware

Slow auto partition on fluent cluster

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 5, 2020, 20:08
Default Slow auto partition on fluent cluster
  #1
New Member
 
Abdullah Ilyas
Join Date: Jun 2013
Posts: 9
Rep Power: 9
Abdullah Elyas is on a distinguished road
Hey everyone! Hope you are all well I am reposting the question which was left unanswered previously
I am using fluent on a two machine cluster. Both having intel xeon 2ghz 14 core dual processor. 256 GB RAM. Both machines are connected via qlogic 10 GBe connection. My problem size is 50M~.I am having problem while auto partitioning the mesh. It takes about 2 hrs to partition the mesh. This problem does not occur in single node configuration. What can I do to improve the performance?
Abdullah Elyas is offline   Reply With Quote

Reply

Tags
fluent cluster, partitioning mesh, slow read write

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Scripts to run fluent in Linux cluster via windows sanjaykummar2810 FLUENT 1 September 19, 2018 16:23
Running UDF with Supercomputer roi247 FLUENT 4 October 15, 2015 13:41
Slow overwriting of parameter values when Fluent is opened zubs FLUENT 0 April 10, 2015 05:18
Fluent 14.0 file not running in parallel mode in cluster tejakalva FLUENT 0 February 4, 2015 07:02
[Solution] Fluent hangs on exit in a 2 nodes cluster ghost82 FLUENT 0 November 9, 2014 09:11


All times are GMT -4. The time now is 11:48.