|
[Sponsors] |
January 26, 2022, 20:40 |
please help issue with SuperMicro H12DSi-N6
|
#1 |
New Member
Abelardo Jara-Berrocal
Join Date: Jan 2022
Posts: 8
Rep Power: 4 |
Hi I hope everyone is well, I have a supermicro H12DSi-N6 and installed two Epyc Milan on it
I connected CPU FAN 1 (Noctua 14) to fan 2 connector and CPU FAN2 to fan connector 6 the connectors to front panel are right, however as soon as I give power to the motherboard, system turns on without me pushing the on button, the CPU fans start spinning and the LED2 turns on. Do you know what could be wrong? are the CPUs burned or could be the culprit. I can access the BMC web UI and on the CPU the CPUs and memories are listed as green but the fan tab shows no fans the fans are spinning so i know they are working please help |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issue on zeroGradient BC for system rotation | magnushaese | OpenFOAM Running, Solving & CFD | 2 | January 28, 2022 13:43 |
rhoCentralFoam inviscid airfoil issue (Foam::error::printStack(Foam::Ostream&) at ??) | kmkb21 | OpenFOAM Running, Solving & CFD | 1 | March 1, 2018 01:07 |
Prism Layer - Core Mesh Boundary Issue | InfernoxCJC | STAR-CCM+ | 7 | November 21, 2017 15:46 |
foamToTecplot360 issue with multiregion solvers | manuc | OpenFOAM Post-Processing | 2 | November 21, 2016 13:51 |
Pressure boundary condition issue | Vijay | FLUENT | 0 | April 6, 2012 13:35 |