|
[Sponsors] |
RTX 3060 12gb vs Arc A770 16gb vs Radeon RX 7600 XT 16gb |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 2, 2024, 05:18 |
RTX 3060 12gb vs Arc A770 16gb vs Radeon RX 7600 XT 16gb
|
#1 |
New Member
Lucuss
Join Date: Feb 2024
Posts: 1
Rep Power: 0 |
Hello!
I am currently in the process of selecting a new GPU and would greatly appreciate your insights and expertise in helping me make an informed decision. have narrowed down my options to three models within a similar price range: the RTX 3060 12GB, Arc A770 16GB, and Radeon RX 7600 XT 16GB, with a price difference of +$25 each.owever, I find myself uncertain about which one would be the best for running CFD. Is any of the above gpu good or is there any alternative that is better in the similar price range? Thank you. =============================================== 3060 12gb https://www.amazon.co.uk/MSI-GeForce...c-d11b6e3d217f Arc 770 16gb https://www.currys.co.uk/products/ac...aign_id=127079 RX 7600XT https://www.scan.co.uk/products/nda-...edium=referral |
|
February 6, 2024, 02:28 |
|
#2 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,399
Rep Power: 46 |
RTX 3060, probably. The AMD card is likely fine as well. But the Intel driver team still has some work ahead of them, before I can recommend an Intel graphics card.
None of the GPUs will help you run your CFD simulations. But the Nvidia card will give you the least amount of trouble in terms of compatibility. See also chapter 3 for a more informed decision: General recommendations for CFD hardware [WIP] |
|
Tags |
gpu |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Karman vortex street 3d with turbulence (pimpleFoam) | Leoma | OpenFOAM | 6 | July 23, 2021 17:17 |
[blockMesh] Openfoam: Meshing, where do my defaultFaces come from | syntex | OpenFOAM Meshing & Mesh Conversion | 19 | December 10, 2018 07:21 |
[blockMesh] Another cylinder question | bendel_boy | OpenFOAM Meshing & Mesh Conversion | 5 | January 6, 2015 05:09 |
[Other] mergeMatchPairs with arcs | vainilreb | OpenFOAM Meshing & Mesh Conversion | 1 | August 5, 2013 08:11 |
[blockMesh] apparently the mesh doesn't want to be created in one direction | Maxime Thomas | OpenFOAM Meshing & Mesh Conversion | 1 | August 18, 2012 06:05 |