Fluid mixing

anubhav106 · October 9, 2014, 07:13

Hello all
I am trying to solve a problem in which there is a cylinder having two inlets and one outlet.one inlet is for argon gas and other for steam.can anybody suggest me how to approach it with the boundary conditions.(at inlet 1 velocity. 5 and at inlet 2 velocity 3 m/s)

lcarasik · October 9, 2014, 14:12

Are you trying to use CFD to solve this problem?

anubhav106 · October 15, 2014, 00:32

Yes I am trying this problem using Ansys fluent

lcarasik · October 15, 2014, 10:51

I recommend looking through their multiphase tutorials in Fluent. Also, we have a ANSYS subforum on here, where that question would be more readily answered. Learn the appropriate manner for modeling steam first from an appropriate literature review/asking the ANSYS tech support for help.

October 9, 2014, 07:13	Fluid mixing	#1
anubhav106 New Member anubhav Join Date: Oct 2014 Posts: 2 Rep Power: 0	Hello all I am trying to solve a problem in which there is a cylinder having two inlets and one outlet.one inlet is for argon gas and other for steam.can anybody suggest me how to approach it with the boundary conditions.(at inlet 1 velocity. 5 and at inlet 2 velocity 3 m/s)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to setup two mixing fluid (no reaction)	Miner	FLUENT	3	April 10, 2016 13:32
Simple Fluid Mixing	bman1994	FLUENT	8	July 22, 2014 16:56
Solver for compressible two fluid mixing with heat transfer	inf.vish	OpenFOAM Running, Solving & CFD	4	July 31, 2013 09:39
My Revised "Time Vs Energy" Article For Review	Abhi	Main CFD Forum	2	July 9, 2002 09:08
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11

October 9, 2014, 14:12		#2
lcarasik Senior Member Lane Carasik Join Date: Aug 2014 Posts: 692 Rep Power: 14	Are you trying to use CFD to solve this problem?

October 15, 2014, 00:32		#3
anubhav106 New Member anubhav Join Date: Oct 2014 Posts: 2 Rep Power: 0	Yes I am trying this problem using Ansys fluent

October 15, 2014, 10:51		#4
lcarasik Senior Member Lane Carasik Join Date: Aug 2014 Posts: 692 Rep Power: 14	I recommend looking through their multiphase tutorials in Fluent. Also, we have a ANSYS subforum on here, where that question would be more readily answered. Learn the appropriate manner for modeling steam first from an appropriate literature review/asking the ANSYS tech support for help.