Inflation layers / boundary layer meshing.

February 19, 2009, 04:26

Hi All,

Does anyone know of publications / references / web-sites that discuss techniques / algorithms for generating prismatic inflation layer meshes at the boundary of a domain and the integration into a tetrahedral / triangular mesh?

I would be very happy to hear about simple algorithms for 2-D meshes as well as anything about 3-D.

Thanks in advance. andy2o

February 20, 2009, 19:10

hmmm, the dark side otherwise known as star excels in it

February 21, 2009, 11:53

Hello andy2o,

Dr. Steve Karman at the University of Tennessee at Chattanooga is researching this topic. Here is one reference that I was able to find on the UT SimCenter's web site, http://www.utc.edu/Research/SimCenter/index.php.

S. Karman Jr., "Unstructured Viscous Layer Insertion Using Linear-Elastic Smoothing," AIAA Journal, Volume 45, Number 1, pp. 168-180, January 2007.

I'm sure other researchers are investigating this issue.

February 22, 2009, 10:03

John,

Many thanks - that should give me a starting point for a literature search / citation search etc. (I hadn't heard the term 'viscous layer insertion' before. Finding the right search term is often half the work....)

Best regards, Andy

February 19, 2009, 04:26	Inflation layers / boundary layer meshing.	#1
andy2o Guest Posts: n/a	Hi All, Does anyone know of publications / references / web-sites that discuss techniques / algorithms for generating prismatic inflation layer meshes at the boundary of a domain and the integration into a tetrahedral / triangular mesh? I would be very happy to hear about simple algorithms for 2-D meshes as well as anything about 3-D. Thanks in advance. andy2o

February 20, 2009, 19:10	Re: Inflation layers / boundary layer meshing.	#2
alex Guest Posts: n/a	hmmm, the dark side otherwise known as star excels in it

February 21, 2009, 11:53	Re: Inflation layers / boundary layer meshing.	#3
John Chawner Guest Posts: n/a	Hello andy2o, Dr. Steve Karman at the University of Tennessee at Chattanooga is researching this topic. Here is one reference that I was able to find on the UT SimCenter's web site, http://www.utc.edu/Research/SimCenter/index.php. S. Karman Jr., "Unstructured Viscous Layer Insertion Using Linear-Elastic Smoothing," AIAA Journal, Volume 45, Number 1, pp. 168-180, January 2007. I'm sure other researchers are investigating this issue.

February 22, 2009, 10:03	Re: Inflation layers / boundary layer meshing.	#4
andy2o Guest Posts: n/a	John, Many thanks - that should give me a starting point for a literature search / citation search etc. (I hadn't heard the term 'viscous layer insertion' before. Finding the right search term is often half the work....) Best regards, Andy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Fail to create boundary layers during sHM	farahiam	OpenFOAM Meshing & Mesh Conversion	13	October 15, 2014 20:46
[GAMBIT] 3d boundary layer meshing problem	bugra	ANSYS Meshing & Geometry	0	August 24, 2010 09:13
Meshing with hexaedral and boundary layer	sophie-l	Main CFD Forum	1	May 20, 2009 23:18
Meshing cylinders with boundary layer using Gambit	Florence	ANSYS Meshing & Geometry	5	April 1, 2009 13:36
How to do boundary layer meshing in a 3D diffuser	Durgendra	Main CFD Forum	1	June 26, 2006 09:18