CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

Source Term in Cylindrical Coordinate.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 26, 2000, 08:15
Default Source Term in Cylindrical Coordinate.
Posts: n/a
Hello, I am using 3D euler equ.s for turbomachine problems. The equations are in fixed frame of reference. I have a doubt about source term in momemtum equ.s for radial and tangential velocity. I am using presently the equ. as Given in "Transport Phenomena" by Bird, Stewart & Lightfoot. I came across a paper in J of Turbomachines 1991, which gives souce terms which are different than the terms given in Bird .. Now which is the correct source term I am in a fix.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
momentum source term zwdi FLUENT 14 June 27, 2017 15:40
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
coordinate depending source term jmmeena OpenFOAM 6 July 15, 2009 05:18
coordinate depending source term jmmeena OpenFOAM Programming & Development 0 July 10, 2009 06:54
UDF Source Term Units? Brian FLUENT 1 October 24, 2005 09:15

All times are GMT -4. The time now is 15:12.