|
[Sponsors] |
Initial Boundary condition of velocity for flow over the cylinder by LES simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 19, 2018, 03:06 |
Initial Boundary condition of velocity for flow over the cylinder by LES simulation
|
#1 |
New Member
Join Date: May 2014
Posts: 2
Rep Power: 0 |
Hi all,
I am simulating flow over the cylinder with LES in OpenFOAM. I am not sure about the initial boundary condition for velocity at the inlet. I ran the simulation with the fixed uniform velocity at the inlet but there is overprediction in Lift and Drag coefficient. For this case, the Turbulent intensity has been kept same as experimental data. Simulation: Cd=1.48, Clrms=0.808 Experiment: Cd=1.14 Clrms=0.36 Please provide me some suggestion to overcome this problem |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with chtMultiregionFoam radiation boundary condition | baran_foam | OpenFOAM Running, Solving & CFD | 10 | December 17, 2019 17:36 |
High Courant Number @ icoFoam | Artex85 | OpenFOAM Running, Solving & CFD | 11 | February 16, 2017 13:40 |
HeatSource BC to the whole region in chtMultiRegionHeater | xsa | OpenFOAM Running, Solving & CFD | 3 | November 7, 2016 05:07 |
SLTS+rhoPisoFoam: what is rDeltaT??? | nileshjrane | OpenFOAM Running, Solving & CFD | 4 | February 25, 2013 04:13 |
pisoFoam with k-epsilon turb blows up - Some questions | Heroic | OpenFOAM Running, Solving & CFD | 26 | December 17, 2012 03:34 |