|
[Sponsors] |
July 26, 2018, 04:03 |
Compiling CFL3D
|
#1 |
Member
William Tougeron
Join Date: Jan 2011
Location: Czech Republic
Posts: 70
Rep Power: 15 |
Hi all,
It seems the CFL3D code was recently set public again after a long period. The fact is that the official way ton compile it seems a bit outdated. Even the doc says: "The Install script is very old, and may or may not create a workable makefile for your particular machine." (here) While I followed instructions, I get the following error: Code:
$ ./Install # This seems to work $ make cfl3d_mpi (...) make[1]: Entering directory `/home/tougeron/documents/installation/cfd/cfl3d/CFL3D/build/cfl/libs' mpif90 -DP3D_SINGLE -DLINUX -DINTEL -DDBLE_PRECSN -O2 -w -ip -fno-alias -xHost -traceback -module /home/tougeron/documents/installation/cfd/cfl3d/CFL3D/build/cfl/libs -r8 -c add2x.F gfortran: error: unrecognized command line option ‘-ip’ gfortran: error: unrecognized command line option ‘-fno-alias’ gfortran: error: unrecognized command line option ‘-traceback’ gfortran: error: unrecognized command line option ‘-module’ gfortran: error: unrecognized command line option ‘-r8’ make[1]: *** [add2x.o] Error 1 make[1]: Leaving directory `/home/tougeron/documents/installation/cfd/cfl3d/CFL3D/build/cfl/libs' make: *** [Zlibs] Error 2 Best regards, Last edited by taalf; July 26, 2018 at 05:08. |
|
Tags |
cfl3d compile mpiifort |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Getting error both interpreting and compiling | serene6390 | Fluent UDF and Scheme Programming | 1 | October 27, 2017 00:49 |
CFL3D available on github | Martin Hegedus | Main CFD Forum | 4 | September 23, 2017 11:52 |
All files present. but solver not compiling | saddy | OpenFOAM Programming & Development | 1 | July 29, 2017 09:50 |
[OpenFOAM.org] Trouble Compiling OpenFOAM-dev using Intel Compiler 15 for use on Xeon Phi | foamer123 | OpenFOAM Installation | 9 | August 20, 2015 14:03 |
Help with KIVA4 source code compiling | geothokar | Main CFD Forum | 0 | September 3, 2010 05:40 |