Oscillating Solution e Residuals

Mik511 · February 6, 2019, 11:40

Hi all!

I'm trying to do a pseudo-transient simulation concerning the aerodynamics of a formula car using the k-w SST model but when solving the mesh the residuals keep oscilating and so does the solution. Does anyone know why this happens and how to solve it?

Thank you!

sbaffini · February 7, 2019, 05:15

Give it some more iterations before getting to conclusions.

Also, pseudo-transient, if intended as per Fluent nomenclature, might not be suited and you might need to use a constant, low, CFL number (at least at the beginning).

Wall functions (if your grid has critical y+ values) and some gradient limiters can be problematic as well.

Finally, it can't be excluded, especially if using 2nd order schemes, that a steady solution can't be achieved at all for your case.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oscillating Residuals for flow around an airfoil -ANSYS FLUENT. What should I do?	Muaaz	FLUENT	8	April 2, 2024 14:16
strange residuals - converging -then diverging- then oscillating - then getting weird	juste	FLUENT	3	December 3, 2016 17:26
Could anybody help me see this error and give help	liugx212	OpenFOAM Running, Solving & CFD	3	January 4, 2006 18:07
oscillating residuals	dave	FLUENT	2	December 10, 2004 03:01
Fluent Solution Residuals	RC	FLUENT	2	September 30, 2003 02:34

February 7, 2019, 05:15		#2
sbaffini Senior Member Paolo Lampitella Join Date: Mar 2009 Location: Italy Posts: 2,151 Blog Entries: 29 Rep Power: 39	Give it some more iterations before getting to conclusions. Also, pseudo-transient, if intended as per Fluent nomenclature, might not be suited and you might need to use a constant, low, CFL number (at least at the beginning). Wall functions (if your grid has critical y+ values) and some gradient limiters can be problematic as well. Finally, it can't be excluded, especially if using 2nd order schemes, that a steady solution can't be achieved at all for your case.