|
[Sponsors] |
July 23, 2020, 13:19 |
Hershcel Bulkley Model in Fluent
|
#1 |
New Member
Join Date: Dec 2019
Posts: 7
Rep Power: 6 |
Howdy;
Currently i am using Herschel Bulkley model in Fluent. One of the parameters required is the fluid critical shear rate; I do not know how this parameter can be computed. All experimental data reported in the literature that i have using Herschel Bulkley model is reporting n, k and tau and there is no mentioning of fluid critical shear rate value. Kindly i am asking how can i calculate this value or if there is a certain range i should work within. Note: I am working on Viscous non-Newtonian flow in a horizontal pipe with n=0.85, k=0.0751 pa.sec and tau=7.9 pascal Thanks in advance; MS |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seeking Macroscopic Particle Model in Fluent | bzhang7 | FLUENT | 3 | June 25, 2022 17:54 |
[swak4Foam] swakExpression not writing to log | alexfells | OpenFOAM Community Contributions | 3 | March 16, 2020 18:19 |
interFoam wave propagation and explosion of Courant number and residuals | ChiaraViola | OpenFOAM Running, Solving & CFD | 1 | June 26, 2019 05:36 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
How to create a 3Ds Car Model importing to FLUENT? | spysunny | Main CFD Forum | 1 | January 10, 2012 23:40 |