CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Floating point exception in rhoSimpleFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 16, 2021, 06:47
Default Floating point exception in rhoSimpleFoam
  #1
Member
 
Vinzenz Götz
Join Date: Mar 2021
Location: Munich, Germany
Posts: 31
Rep Power: 5
Vinzmann is on a distinguished road
Hello,
Since I couldn't find anything anywhere about this.My problem is that I have a simulation (file is attached), that does run under specific mesh settings. The problem is that it runs only to a certain extent and then brings up a floating pint exception. My flow is pressure driven and my inlet velocity increases with every iteration until it breaks the simulation. I don't know what to do anymore or what screws to turn so it works out. Could anybody give me any advice on this?
Attached Files
File Type: zip case_20210316_2.zip (176.4 KB, 1 views)
Vinzmann is offline   Reply With Quote

Reply

Tags
floating point exception, rhosimplefoam

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
icoFoam floating point exception (8) leizhao512 OpenFOAM Running, Solving & CFD 7 November 1, 2018 12:43
Floating point exception error after icoFoam Deepacfd OpenFOAM Bugs 1 February 10, 2017 06:35
A floating point exception has occurred: floating point exception [Overflow]. starlight STAR-CCM+ 4 May 4, 2016 10:08
A floating point exception - SEM Model yansheng STAR-CCM+ 1 April 4, 2016 05:57
Floating point exception from twoPhaseEulerFoam openfoammaofnepo OpenFOAM Running, Solving & CFD 1 March 19, 2016 14:56


All times are GMT -4. The time now is 16:54.