CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

permeable wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 23, 2000, 09:06
Default permeable wall
  #1
peter.zhao
Guest
 
Posts: n/a
When I use N-S equation with LU-SGS scheme on the implicit side and MUSCL steger-warming splitting on the explicit side to calculate a blunt cone,I encounter a strange phenomenon:as for the Re>10000 and Mach=15,even with two temperature model nonequlibrium cheamic reaction,I yield the correct result.However,as for the Re=2275 and Mach=22.67 with iso-thermal wall in order to simulate the circumstance on the 70km high altitude,the streamlines give off from the wall so that the stand-off distance of shock wave is beyond the experimental data.It has taken me several weeks to examine the errors of my program but in vain.

Could anyone give me some useful suggestions?All comments are welcomed!

Thanks a lot.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] Fluent3DMeshToFoam simvun OpenFOAM Meshing & Mesh Conversion 50 January 19, 2020 16:33
Natural convection in a closed domain STILL NEEDING help! Yr0gErG FLUENT 4 December 2, 2019 01:04
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 21:30
Multicomponent fluid Andrea CFX 2 October 11, 2004 06:12


All times are GMT -4. The time now is 17:41.