|
[Sponsors] |
March 12, 2001, 16:36 |
Flanal 2D unstructured post-processor
|
#1 |
Guest
Posts: n/a
|
I once used the post-processing program Flanal to plot results for calculations on 2D unstructured meshes, and it did the job quite effectively, on an SGI workstation. Does anybody know where (if) it is possible to get hold of a copy of Flanal, prefereably either as source or as an executable for Linux?
|
|
March 18, 2001, 07:55 |
Re: Flanal 2D unstructured post-processor
|
#2 |
Guest
Posts: n/a
|
I don't know flanal, but for 2D unstructured meshes, GMV at his location:
http://www-xdiv.lanl.gov/XCM/gmv/GMVHome.html The free software works very well under linux. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problems after decomposing for running | alessio.nz | OpenFOAM | 7 | March 5, 2021 04:49 |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
DecomposePar unequal number of shared faces | maka | OpenFOAM Pre-Processing | 6 | August 12, 2010 09:01 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 10:37 |
Post Processor for KIVA | Sasidhar | Main CFD Forum | 1 | November 15, 2004 06:04 |