|
[Sponsors] |
July 8, 2001, 05:40 |
One-/Two--equ--turbulence-model
|
#1 |
Guest
Posts: n/a
|
Dear all,
I am trying to implement the k-eps-model (Lam-Bremhorst) into my 2D - FD - code. (it is a basic code, not very sophisticated, but everybody starts with small steps !!). My Question is: Knows somebody an One-equ-model, where I can at first test the k-equ. before I implement the eps-equ. The geometry I am using is a canal flow and the backwardfacing step. Further questions concerning the k-eqs-equ (Lam-Bremhorst-model): - do I have to use the wall-damping function only in the near of the wall or also at the inlet or outlet. - I am using noslip conditions at the wall, should I implement other bcd at the wall, eg. for consideration of the log-law layer. Thaks for the help Matthias |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SimpleFoam case with SpalartAllmaras turbulence model implemented | nedved | OpenFOAM Running, Solving & CFD | 2 | November 30, 2014 22:43 |
Wrong calculation of nut in the kOmegaSST turbulence model | FelixL | OpenFOAM Bugs | 27 | March 27, 2012 09:02 |
Low Reynolds k-epsilon model | YJZ | ANSYS | 1 | August 20, 2010 13:57 |
KOmega Turbulence model from wwwopenFOAMWikinet | philippose | OpenFOAM Running, Solving & CFD | 30 | August 4, 2010 10:26 |
SSG Reynolds Turbulence Model | Georges | CFX | 1 | February 28, 2007 16:15 |