CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

sponge layer-boundary condition.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 29, 2002, 11:45
Default sponge layer-boundary condition.
Rajani Kumar Akula
Posts: n/a
Hi, Recently i went through a paper and found that at pressure outlet of the domain sponge layer is used.

what is this sponge layer. how it will be implemented in a code as a boundary condition.

i will be very thankfull for your help. bye rajani
  Reply With Quote

Old   January 30, 2002, 05:57
Default Re: sponge layer-boundary condition.
Posts: n/a
Dear Akula

Could you give the reference, please? Thanks


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 3 February 3, 2017 11:54
Boundary layer in a pipe Clementhuon OpenFOAM Native Meshers: snappyHexMesh and Others 6 March 12, 2012 13:41
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 06:49
how to set up a wall boundary condition according to calculated wall shear stress? gameoverli OpenFOAM Pre-Processing 1 May 21, 2009 08:28
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15

All times are GMT -4. The time now is 03:55.