|
[Sponsors] |
February 18, 2002, 07:05 |
Multiphase data
|
#1 |
Guest
Posts: n/a
|
I have set up a spreadsheet which predicts two phase flow patterns, pressure drop, etc. in an annulus. Does anyone know of any available (preferably online)experimental data with which I can test the accuracy of my spreadsheet? Thanks in advance.
|
|
February 19, 2002, 02:57 |
Re: Multiphase data
|
#2 |
Guest
Posts: n/a
|
Online experiment:
http://che-lab.cheme.columbia.edu/ Our laboratory is actually working in two-phase flow patterns, heat transfer and pressure drops in horizontal tubes. Which kind of model are you using ?? .. What do you mean with: ?I have set up a spreadsheet which predicts two phase flow patterns, pressure drop, etc. in an annulus? |
|
February 19, 2002, 03:50 |
Re: Multiphase data
|
#3 |
Guest
Posts: n/a
|
I'm using Fluent's VOF model, in attempt to see the main horizontal two phase flow patterns. As a form of validation, I've implemented a spreadsheet based on mechanistic models published in the literature (they are all generally derived from Taitel & Dukler's 1976 model). The spreadsheet attempts to predict the flow pattern, then apply the appropriate pressure drop equation.
|
|
March 10, 2002, 07:56 |
Re: Multiphase data
|
#4 |
Guest
Posts: n/a
|
Hi Jesus,
I send you this mail 'cause i am working on the reduction of drag of a yacht ship (on Fluent). I would like to use the VOF model in order to modelise the steady waves of the free surface. Could it be possible for you to tell me the configuration i have to set up for this multiphase modelisation (boundary conditions, initialization,multiphase set up, etc...) ps:I use a steady ,ke model. I thank you for your help. Regards, Remy. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
export data at nodes | Meenu | FLUENT | 1 | December 30, 2011 01:24 |
Use data from multiphase into DO radiation | yashmash | FLUENT | 0 | October 7, 2011 03:57 |
Problem in running ICEM grid in Openfoam | Tarak | OpenFOAM | 6 | September 9, 2011 17:51 |
How to update polyPatchbs localPoints | liu | OpenFOAM Running, Solving & CFD | 6 | December 30, 2005 17:27 |
Multiphase experimental data | James McLaren | Main CFD Forum | 1 | September 14, 1998 06:35 |