CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Cell vertex V.S Cell centered

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 4, 2002, 11:07
Default Cell vertex V.S Cell centered
  #1
peter.zhao
Guest
 
Posts: n/a
It's well known that finite volume has two classes. One is cell centered, and the other is cell vertex. I don't known which is better and why?

All comments are welcomed!

  Reply With Quote

Old   November 5, 2002, 17:30
Default Re: Cell vertex V.S Cell centered
  #2
frederic felten
Guest
 
Posts: n/a
Hi there,

A very good discussion about Cell-vertex and Cell-centered is available in chapter 3 of the following reference: "Principles of Computational Fluid Dynamics", P. Wesseling, Springer-Verlag, 2000. ISBN: 3540678530

I hope this helps, sincerely,

Frederic Felten.
  Reply With Quote

Old   November 12, 2002, 20:51
Default Re: Cell vertex V.S Cell centered
  #3
peter.zhao
Guest
 
Posts: n/a
Frederic Felten

Thanks a lot for your answer, but I have not this book, can you tell me what the book says about it?

peter.zhao
  Reply With Quote

Old   November 13, 2002, 04:47
Default Re: Cell vertex V.S Cell centered
  #4
frederic felten
Guest
 
Posts: n/a
Hi peter,

I am currrently travelling and so I don't have the book with me, but be sure that I'll provide you with some insight as soon as I have time.

In the mean time, you could email Dr. Wesseling and ask him directly about some info about cell-vertex Vs cell-centered.

Sincerely,

Frederic Felten.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[mesh manipulation] Mesh Refinement Luiz Eduardo Bittencourt Sampaio (Sampaio) OpenFOAM Meshing & Mesh Conversion 42 January 8, 2017 12:55
[CAD formats] my stl surface is seen as just a line rcastilla OpenFOAM Meshing & Mesh Conversion 2 January 6, 2010 01:30
NACA0012 geometry/design software needed Franny Main CFD Forum 13 July 7, 2007 15:57
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15
Warning 097- AB Siemens 6 November 15, 2004 04:41


All times are GMT -4. The time now is 07:13.