CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

boundary condition problem in centrifugal compressor

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 7, 2010, 05:40
Question boundary condition problem in centrifugal compressor
New Member
Join Date: Nov 2009
Posts: 2
Rep Power: 0
jafar is on a distinguished road
Hi evrybody
I'm doing a centrifugal compressor with vaned diffuser(operating in subsonic regime) simulation, using CFX. when I choose mass flow rate in outlet and static pressure in inlet boundary there is no problem and the results are acceptable, but when I choose pressure in outlet boundary, flow COMPLETELY reveresed in both inlet and outlet boundary. I've tried these conditions:
- changing pressure value
- changing angular velocity
- Opening boundary condition
- outlet average static pressure(average over whole outlet)
- setting mass flow target in rotor-stator interface
but there is no improvement
I appreciate any HELP
jafar is offline   Reply With Quote


boundary condition, centrifugal compressor, cfx

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
boundary condition problem cosine CFX 0 December 28, 2009 16:29
problem with boundary condition??? smn CFX 5 November 24, 2009 07:37
Boundary condition for ventilation problem D.Prakash FLUENT 1 September 13, 2005 12:29
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
a problem with Boundary condition M Rad Main CFD Forum 12 November 27, 1998 13:49

All times are GMT -4. The time now is 18:52.