Home > Forums > General Forums > Main CFD Forum

why i can't split a real volume with a virtual face.

Mark Forums Read

Reply

Search this Thread

March 8, 2010, 04:41	why i can't split a real volume with a virtual face.	#1
George Chen 28 New Member Join Date: Mar 2010 Posts: 22 Rep Power: 17	Hi, Pals. I have a question with Gambit. I regenetated a real volume and a virtual face hosted on four faces of the volume. when I used the virtual face to split the volume, error occured--"attempted to split volume volume.1 using face v_face.8 that doesn't divide into two parts(has edges no common with the volume)." Help me, please!

Reply

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gmsh2ToFoam	sarajags_89	OpenFOAM	0	November 24, 2009 23:50
convert virtual volume to a real one	djalil	FLUENT	0	January 22, 2009 16:07
virtual or real flow volume for wind tunnel?	qm	FLUENT	1	January 9, 2009 16:26
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55
Flow + split volume	Mark	FLUENT	3	March 18, 2003 11:09

All times are GMT -4. The time now is 02:35.