CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

creating vortex core line

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 15, 2010, 21:49
Default creating vortex core line
  #1
New Member
 
aziz
Join Date: Apr 2010
Posts: 1
Rep Power: 0
aay023 is on a distinguished road
hi there,

I try to make CFD study on suction vortices in sump pump. The purpose is to detect and visualize vortex core line that possibly enter the pump. This kind of vortex will decrease efficiency of pump.

However, I don't know how to visualize vortex core line. My question is, how to locate and visualize vortex core line in CFD software. What i mean with vortex core line is a line that locate in the center of 3D vortex and by visualizing it, I can see how long the vortex is. I use CFX-post.

thank you
aay023 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 02:09
[blockMesh] BlockMesh FOAM warning gaottino OpenFOAM Meshing & Mesh Conversion 7 July 19, 2010 14:11
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 14:00
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 15:16


All times are GMT -4. The time now is 09:17.