CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Algebraic Stress Model and Collocated grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 31, 2005, 22:46
Default Algebraic Stress Model and Collocated grid
  #1
Keur
Guest
 
Posts: n/a
Hello everyone,

I am trying to simulate and capture the secondary currents by employing Launder and Ying's Algebraic Stress Model in 3D open channel flow.

I am using Peirc's 3D version code, which was initially developed to simulate the lid driven cavity flow in 3D cubic cavity and uses collocated variable arrangement with multigrid convergence accelerator. I incorporated standard k-epsilon model first, which seems to be working fine.

I am adding the gradients of Reynolds stresses, Reynolds stresses calculated from Launder and Ying's Algebraic Stress Model, as an additional source terms into V and W momentum equations.

Now, I am getting huge discrepancies at wall boundaries.

Can anyone suggest any idea??

Thanks, Keyur
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
references about the fan/radiator model Mihai ARGHIR Main CFD Forum 1 January 8, 2001 16:49
references about the fan/radiator model Mihai ARGHIR FLUENT 0 December 21, 2000 04:07
references about the fan/radiator model Mihai ARGHIR Main CFD Forum 0 December 21, 2000 04:06
references about the fan/radiator model Mihai ARGHIR Main CFD Forum 1 December 17, 2000 08:01
references about the fan/radiator model Mihai ARGHIR FLUENT 0 December 17, 2000 07:40


All times are GMT -4. The time now is 00:25.