CFD Online Logo CFD Online URL
Home > Forums > Mesh Generation & Pre-Processing

meshing problem with some complicated geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 27, 2013, 08:42
Default meshing problem with some complicated geometry
New Member
Parth Panchal
Join Date: Dec 2013
Posts: 2
Rep Power: 0
Parth320 is on a distinguished road
i have to work with cfd fluent. before that as a part of pre processing i need to mesh tha geometry. My geometry is assembled with 15 components. So basically its a very complicated geometry. I need to work for heat transfer analysis of that geometry. please suggest some capable software that can sucessfully and easily mesh the assembly.
if anybody is having mastery in meshing, please let me know.
thanking you...
Parth320 is offline   Reply With Quote

Old   February 7, 2014, 00:13
New Member
Join Date: Oct 2010
Posts: 6
Rep Power: 9
Ramjan is on a distinguished road
hopefully its same geometry which i replied sometime back
Please share the geometry, I will help you
Ramjan is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[DesignModeler] Fill tool - grouping the faces of a complicated geometry? HeikkiT ANSYS Meshing & Geometry 8 July 20, 2016 07:37
[ICEM] Meshing a pipe geometry selvam2487 ANSYS Meshing & Geometry 4 September 2, 2013 12:47
Problem meshing an imported geometry Alicia Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 March 30, 2010 04:53
Problem meshing turb. blade tip clearance geometry Balu FLUENT 0 June 7, 2008 21:10
Meshing problem in GAMBIT Vidya Raja FLUENT 0 May 20, 2006 23:31

All times are GMT -4. The time now is 22:17.