Home > Forums > Special Topics > Mesh Generation & Pre-Processing

minimizing the error in 2d mesh (HYPERMESH)

Updated Threads

Reply

Search this Thread

January 26, 2015, 02:42	minimizing the error in 2d mesh (HYPERMESH)	#1
sagch New Member sagar chopra Join Date: Jun 2014 Posts: 6 Rep Power: 11	i have tried to surface mesh the turbine using surface deviation option but the values of cell squish and equia skew i am getting are very high. what measures should i take to reduce those values to around 0.3 to 0.4. the link of the model is https://www.dropbox.com/s/owgwxc6vlm...urbine.hm?dl=0

Reply

Tags

2d mesh, 2d mesh into 3d, hypermesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface	Kryo	OpenFOAM Meshing & Mesh Conversion	13	February 17, 2022 07:34
[snappyHexMesh] problems generating clean mesh	Christian_tt	OpenFOAM Meshing & Mesh Conversion	2	June 20, 2019 05:39
How to import mesh file in OpenFOAM,created in Hypermesh	devesh.baghel	OpenFOAM	17	June 8, 2016 07:40
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

All times are GMT -4. The time now is 12:32.