|
[Sponsors] |
August 23, 2015, 05:48 |
Meshing in ICEM CFD 15.0
|
#1 |
Senior Member
|
Dear all,
Hi. Hope everyone is well. I am a novice at ANSYS. I have developed a geometry and have now opened my model in ICEM CFD 15.0. Basically I want to mesh a boundary layer in all inner faces (walls), using an initial spacing of 1 cm, with a growth factor of 1.2 and four layers in total, giving a total boundary layer thickness of 5.37 cm. Remainder of the volume has to be meshed using hex elements and a cooper meshing with a spacing of 5 cm. Please tell me the procedure how to accomplish this. Would be extremely grateful. Thanks. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] ANSYS Meshing vs ICEM CFD | jayyeahhkay | ANSYS Meshing & Geometry | 6 | December 14, 2014 00:43 |
icem cfd meshing problem | timothi61 | ANSYS | 2 | July 16, 2013 14:22 |
[ICEM] problem with meshing in icem cfd | saurabhjoshi2011 | ANSYS Meshing & Geometry | 13 | March 12, 2013 11:27 |
[Other] Ansys Meshing vs Ansys ICEM CFD | JuPa | ANSYS Meshing & Geometry | 5 | September 19, 2012 09:48 |
[ICEM] Helicopter meshing tutorial - ICEM CFD | Far | ANSYS Meshing & Geometry | 0 | May 20, 2012 11:10 |