|
[Sponsors] |
November 29, 2019, 02:04 |
SnappyHexMesh on convex surfaces
|
#1 |
Member
Join Date: Feb 2018
Posts: 58
Rep Power: 8 |
Hey Forum,
im trying to build a inflate boundary layer in my CFD model, to calculate the turbulence correctly. I use SimScale with SnappyHexMesh. On flat surfaces the infalte boundary layer was created very good and looks proper, but on concave surfaces the layer collaps suddenly, and came back from the surface. Did you have any experince with concave surfaces with an inflate boundary layer and SnappyHexMesh ? Here is a screenshot: Best regards Kai |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] creating baffles using snappyHexMesh (for given random shaped surfaces) | ashish.svm | OpenFOAM Meshing & Mesh Conversion | 1 | January 17, 2018 01:24 |
[snappyHexMesh] snappyHexMesh for Intersecting surfaces | Anamitra | OpenFOAM Meshing & Mesh Conversion | 0 | June 14, 2016 05:38 |
[snappyHexMesh] MultiRegionMeshing with SnappyHexMesh - SplitMeshRegions doesnt pickup my surfaces | Kenneth J. | OpenFOAM Meshing & Mesh Conversion | 0 | January 30, 2015 10:07 |
[snappyHexMesh] snappyHexMesh not refining surfaces | Hydro1004 | OpenFOAM Meshing & Mesh Conversion | 3 | August 29, 2012 11:56 |
[snappyHexMesh] problemes modelling surfaces with snappyhexmesh | gija79 | OpenFOAM Meshing & Mesh Conversion | 5 | June 30, 2010 13:50 |