CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

2D viscous layer in Salome. (Flat plate simulation)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 25, 2021, 09:52
Default 2D viscous layer in Salome. (Flat plate simulation)
  #1
New Member
 
Akin-iii's Avatar
 
Akin AKinneye
Join Date: Apr 2019
Location: Lagos, Nigeria
Posts: 6
Rep Power: 4
Akin-iii is on a distinguished road
Hello,

I recently made the switch to Salome and I am having issues creating the viscous 2D layer necessary to capture boundary layer effects for a fluid flow simualation.

I have a rectangular domain with the lower half face serving as a wall.

How do I create the viscous layers directly above the wall for 2D meshes?

I tried doing it the same way for 3d meshes but clearly I'm doing something wrong as the viscous layers do not form.

N.B. I've done something similar with a 'stepped' flat plate and i didn't have the issue but it was in 3D.

I look forward to hearing from you.



Thanks!

Attachment 85573
Akin-iii is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oscillating Flat Plate using Pseudo compressibility (Stokes boundary layer) Shiv1510 Main CFD Forum 2 July 14, 2019 12:06
LES outflow condition for a subsonic flat plate boundary layer chris x Main CFD Forum 3 August 25, 2018 06:09
Turbulent Boundary Layer on a Flat Plate Hoshang Garda FLUENT 1 November 27, 2013 11:24
Boundary Layer of Laminar Flow over a Flat Plate Blasius_Pohlhausen_Crocco Main CFD Forum 12 September 30, 2013 18:35
Flat plate boundary layer problem student Main CFD Forum 3 May 21, 2007 14:10


All times are GMT -4. The time now is 19:50.