GMSH Mesh export to SU2 issue

hk.narahari · August 1, 2021, 08:27

Hi,
I was interested in computing some of the test cases in HiOCFD5 where GMSH grids in .msh format are provided. in SU2 CFD code. When I tried to export the .msh file as .SU2 some issue has cropped up. Number of NELEM = 0 !!. All the MARKERs are showing-up except the volumes and SU2 does not run. I am at a loss here and any help suggestions would be of great help. Cant upload the file as it is about 4Mb
Mesh files are at https://how5.cenaero.be/content/ci1-inviscid-bow-shock
Thanks in Advance
Narahari

ari003 · September 14, 2021, 09:02

Quote:

Originally Posted by hk.narahari

Hi,
I was interested in computing some of the test cases in HiOCFD5 where GMSH grids in .msh format are provided. in SU2 CFD code. When I tried to export the .msh file as .SU2 some issue has cropped up. Number of NELEM = 0 !!. All the MARKERs are showing-up except the volumes and SU2 does not run. I am at a loss here and any help suggestions would be of great help. Cant upload the file as it is about 4Mb
Mesh files are at https://how5.cenaero.be/content/ci1-inviscid-bow-shock
Thanks in Advance
Narahari

Maybe while exporting save it in ASCII format and deselect any tick in the option.

August 1, 2021, 08:27	GMSH Mesh export to SU2 issue	#1
hk.narahari Member Dr. H.K. Narahari Join Date: Jan 2019 Posts: 49 Rep Power: 8	Hi, I was interested in computing some of the test cases in HiOCFD5 where GMSH grids in .msh format are provided. in SU2 CFD code. When I tried to export the .msh file as .SU2 some issue has cropped up. Number of NELEM = 0 !!. All the MARKERs are showing-up except the volumes and SU2 does not run. I am at a loss here and any help suggestions would be of great help. Cant upload the file as it is about 4Mb Mesh files are at https://how5.cenaero.be/content/ci1-inviscid-bow-shock Thanks in Advance Narahari

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Export a Gmsh Mesh to CFX	Tobi7	Main CFD Forum	1	July 17, 2020 11:45
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 10:38
[Gmsh] gmshToFoam problem: not the same mesh in Gmsh vs. paraview	zhernadi	OpenFOAM Meshing & Mesh Conversion	8	July 7, 2011 03:28
mesh missing after export in gambit	morteza08	ANSYS Meshing & Geometry	1	July 26, 2010 02:10
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 20:08