CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Mesh Generation of a cold plate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 23, 2022, 07:34
Default Mesh Generation of a cold plate
  #1
New Member
 
Georgi Atanasov Gechev
Join Date: Jun 2022
Location: Darmstadt, Germany
Posts: 2
Rep Power: 0
gg90keki is on a distinguished road
Dear Forum Users,

i am writing my master thesis about a conjugate heat transfer simulation of a battery module and i am stuck on the meshing of the solid domain (cold plate). Unfortunately i am not sure how to proceed and i am hoping that someone can help me out a little.
The fluid domain has been meshed using ICEM CFD with the blocking function. I managed to get a quality better than 0.65 with Hexa-elements and a reasonable number of volume elements.
For the processing i am using OpenFoam with the pimpleFoam solver and different turbulence models (LES and RAS). This would be the first part of my thesis, which is practicaly done.
For the second part i would like to manage the heat transfer between the cells and the cold plate, and the conjugate heat transfer between fluid and cold plate. As i said i cannot manage to get a reasonable mesh of the cold plate. I tried with ICEM CFD (blocking and automated mesh) but i cannot get a good enough mesh (quality better than 0.5)
Is there a way that i could get an automated mesh wich will also work later with OpenFoam and have a good quality?

I would be very grateful if someone could help me out a little.
Best Regards
Georgi
Attached Images
File Type: jpg Cold_plate_1.jpg (24.6 KB, 2 views)
File Type: jpg Cold_plate_2.JPG (33.5 KB, 3 views)
gg90keki is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water! divergence OpenFOAM Meshing & Mesh Conversion 0 January 23, 2019 05:17
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Negitive Mesh Element Volume Due to a Heave Plate Cluain CFX 3 April 4, 2012 18:49
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09


All times are GMT -4. The time now is 08:07.