|
[Sponsors] |
July 23, 2011, 10:37 |
UNV to OF conversion
|
#1 |
Member
|
Greetings, colleagues.
Probably, I found bug in ideasUnvToFoam. I've created mesh in Salome 6.3.0 and converted it into OF using ideasUnvToFoam. The mesh was damaged during conversion. I attach 2 png-files which explain the problem. The unv-file and the result of it's conversion into OF format may be downloaded by following link: http://files.mail.ru/MRBVD3 OF version: 1.7.1 OS: OpenSUSE 11.4 64 bit The simulation problem is flow in 2D tube around gaussian-like obstacle. Best regards, Aleksey. |
|
July 25, 2011, 17:18 |
|
#2 |
Member
|
At last, I solved this problem. Solution: scale mesh with coefficient 100 -> save in .unv -> convert to OpenFOAM format -> scale 0.01.
It appeared that OpenFOAM converter fails to read small quantities... |
|
Tags |
bug, ideasunvtofoam |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mesh conversion exits prematurely (Salome to OF) | DMcP | OpenFOAM | 1 | May 16, 2024 09:35 |
[Salome] unv mesh corrupted after createPatch | maddalena | OpenFOAM Meshing & Mesh Conversion | 1 | February 18, 2010 07:43 |
[Commercial meshers] Several problems with the mesh conversion utility when converting the meshes from Gridgen | su_junwei | OpenFOAM Meshing & Mesh Conversion | 2 | July 26, 2008 23:58 |
[Salome] UNV IO Source Code | gdbaldw | OpenFOAM Meshing & Mesh Conversion | 4 | March 7, 2008 08:47 |
Energy Conversion Systems (Power and Pro.) Tools | Gordan Feric / Engineering Software (EngWare) | Main CFD Forum | 0 | August 26, 2001 23:14 |