[swak4Foam] how can write convective BC on outlet in groovyBC?

immortality · July 13, 2013, 08:46

in which part of convective BC there is its formulation and how can apply it in groovyBC?

Bernhard · July 13, 2013, 13:00

There is also an "advective" boundary condition by default. I assume this does exactly what you require.

immortality · July 13, 2013, 16:28

Hi Bernhard
could you please give me some instructions about when these type of boundary conditions are applicable and useful?
are ther useful for unsteady flows?

Bernhard · July 15, 2013, 04:51

Why do you want to use it?

I would use advective BC's at outlet for typical convection-diffusion equations (e.g. concentration transport). Have a look in the .H of the boundary condition, it contains a lot of info about what is actually done. They are certainly useful for unsteady flows.

July 13, 2013, 08:46	how can write convective BC on outlet in groovyBC?	#1
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	in which part of convective BC there is its formulation and how can apply it in groovyBC? __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

July 13, 2013, 16:28		#3
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	Hi Bernhard could you please give me some instructions about when these type of boundary conditions are applicable and useful? are ther useful for unsteady flows? __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

July 15, 2013, 04:51		#4
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 22	Why do you want to use it? I would use advective BC's at outlet for typical convection-diffusion equations (e.g. concentration transport). Have a look in the .H of the boundary condition, it contains a lot of info about what is actually done. They are certainly useful for unsteady flows. immortality and HesamAUT like this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Strange Results at Tank Outlet with InterFoam	mgdenno	OpenFOAM	18	November 28, 2019 23:05
Pressure Outlet - Effect of domain	bineet_aero	STAR-CCM+	3	April 5, 2016 04:51
Pressure Outlet - Effect of domain	bineet_aero	Main CFD Forum	3	April 5, 2016 04:50
Compressible flow, no data at the outlet	mireis	FLUENT	6	September 3, 2015 02:10
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 15:45

July 13, 2013, 13:00		#2
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 22	There is also an "advective" boundary condition by default. I assume this does exactly what you require.