[waves2Foam] Does the surfaceElevation utility give correct results for parallel case?

ashim · July 22, 2015, 08:40

Hello Niels,

Does the surfaceElevation utility give correct results for parallel case? I am using it in foam-extend 3.1. In serial simulation this utility is giving correct results, but in parallel simulation near the processor boundary the results is not correct.

Thank you very much.

Kind regards,

Ali

ngj · July 22, 2015, 09:24

Hallo Ali,

This is a known bug:

http://sourceforge.net/p/openfoam-ex...aves2foam/223/

I have not yet found a solution to this, but you could try to change the interpolation routine for the sampling.

Kind regards,

Niels

July 22, 2015, 08:40	Does the surfaceElevation utility give correct results for parallel case?	#1
ashim Member Ali Join Date: Oct 2013 Location: St John's Canada Posts: 31 Rep Power: 12	Hello Niels, Does the surfaceElevation utility give correct results for parallel case? I am using it in foam-extend 3.1. In serial simulation this utility is giving correct results, but in parallel simulation near the processor boundary the results is not correct. Thank you very much. Kind regards, Ali

July 22, 2015, 09:24		#2
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,900 Rep Power: 37	Hallo Ali, This is a known bug: http://sourceforge.net/p/openfoam-ex...aves2foam/223/ I have not yet found a solution to this, but you could try to change the interpolation routine for the sampling. Kind regards, Niels __________________ Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rasInterFoam appears to give erroneous results for “pd”.	richard_kenny	OpenFOAM Bugs	6	August 2, 2013 17:12
why dynamic mesh method give wrong results?	weiyang1980	Main CFD Forum	0	September 22, 2009 21:06
Test Case results for Semi-Cylinder	shankar1221989	Main CFD Forum	0	June 24, 2009 06:35
Must periodic oscillation give periodic results?	zonexo	Main CFD Forum	6	May 13, 2007 15:36
who can give me some case?	willams	FLUENT	2	July 29, 2001 07:39