|
[Sponsors] |
[ImmersedBoundary] Immersed Boundary Method in OpenFOAM-3.1-ext |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 3, 2014, 12:17 |
Immersed Boundary Method in OpenFOAM-3.1-ext
|
#2 |
New Member
miladrakhsha
Join Date: Aug 2012
Posts: 29
Rep Power: 13 |
I am experiencing with the implementation of IBM in OpenFOAM. I am working with simpleIbFoam. It would be great if this method could be implemented in the future version of OpenFOAM ext by default as it is a very powerful method. However, I did not find the currrent implementation robust enough yet. My case terminates after a couple of iterations without any warning or any error message so I dont rally know where the problem is!!! My only gauss is that it has something to do with the "k" equation!
this is a small part of my log file: Code:
Time = 6 DILUPBiCG: Solving for Ux, Initial residual = 7.0369e-05, Final residual = 6.80687e-11, No Iterations 5 DILUPBiCG: Solving for Uy, Initial residual = 0.000326453, Final residual = 2.10094e-10, No Iterations 5 DILUPBiCG: Solving for Uz, Initial residual = 7.49995e-06, Final residual = 1.87974e-11, No Iterations 5 GAMG: Solving for p, Initial residual = 0.0588972, Final residual = 0.00623836, No Iterations 1000 time step continuity errors : sum local = 1.84801e-06, global = -2.04249e-09, cumulative = -4.51088e-09 DILUPBiCG: Solving for omega, Initial residual = 0.0135086, Final residual = 3.48746e-05, No Iterations 1 DILUPBiCG: Solving for k, Initial residual = 0.0159819, Final residual = 5.767e-05, No Iterations 1 bounding k, min: -0.940922 max: 1.77288 average: 0.00776461 ExecutionTime = 198.19 s ClockTime = 198 s forces output: forces(pressure, viscous)((0.000193756 -2.15261e-05 0.000364652) (4.89027e-10 7.44523e-11 6.68369e-13)) moment(pressure, viscous)((2.45693e-05 -3.77346e-05 -1.48994e-05) (-1.28583e-12 5.10029e-12 -2.34689e-11)) Field p min = -19.5442 max = 3.89681 Field U magnitude min = 0 max = 6.16393 forceCoeffs output: Cd = -0.013689 Cl = 0.581642 Cm = 0.059539 Time = 7 DILUPBiCG: Solving for Ux, Initial residual = 6.97614e-05, Final residual = 9.57514e-11, No Iterations 5 DILUPBiCG: Solving for Uy, Initial residual = 0.000280219, Final residual = 1.82e-10, No Iterations 5 DILUPBiCG: Solving for Uz, Initial residual = 6.51344e-06, Final residual = 2.49325e-11, No Iterations 5 GAMG: Solving for p, Initial residual = 0.0732228, Final residual = 0.00731821, No Iterations 871 time step continuity errors : sum local = 1.70086e-06, global = -2.23902e-09, cumulative = -6.7499e-09 DILUPBiCG: Solving for omega, Initial residual = 0.00702349, Final residual = 3.47449e-05, No Iterations 1 DILUPBiCG: Solving for k, Initial residual = 0.00908902, Final residual = 4.9913e-05, No Iterations 1 bounding k, min: -1.34002 max: 3.64086 average: 0.00851153 I tried to use bounded schemes for k and omega in fvSchemes but it seems that it does not recognize bounded scheme ! I would really appreciate if somebody can help. Thank you ---------------- Moderator note: This specific topic was later discussed here in more detail: http://www.cfd-online.com/Forums/ope...m-1-6-ext.html The remaining thread is on the topic of porting to foam-extend 3.1 Last edited by wyldckat; September 14, 2014 at 05:35. Reason: See "Moderator note" and added [CODE][/CODE] |
|
Tags |
immersed boundary method, openfoam-1.6-ext, openfoam-3.1-ext |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
implementation of the Immersed Boundary Method | mi_cfd | Main CFD Forum | 19 | April 24, 2019 01:24 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
[ImmersedBoundary] who has the paper about immersed boundary method in openfoam | blueshit | OpenFOAM Community Contributions | 1 | November 18, 2013 07:16 |