[cfMesh] CFMesh for blue core CFD

naveen.hariprasad · December 12, 2016, 04:33

Hello everyone,

I am Naveen Hariprasad, a new user of OpenFOAM. I am running OpenFOAM on my windows 10 machine. I chose blue core CFD terminal to run OpenFOAM and it works fine. I have chosen CfMesh as the meshing application for OpenFOAM. I tried installing cfMesh inside the blue core terminal. However, I ended up with lot of errors. I followed the instruction for installing cfMesh inside the blue core CFD terminal. Later, when observed, it was found that the cfMesh utility in blue core CFD is developed only OpenFOAM version 2.3. I have installed OpenFOAM version 4.x in the blue core CFD and the cfMesh for this version is not yet developed. I am not sure if this is the exact cause of the problem. I would request some comments/inputs from people who have faced a similar problem.

Thank you,
Naveen Hariprasad

wyldckat · December 13, 2016, 16:27

Quick answer: I've created a task for this here: https://github.com/blueCFD/Core/issues/37 - namely to bring the latest cfMesh to build with blueCFD-Core 2016. I'll try to take care of this next weekend.

wyldckat · March 4, 2018, 16:11

Quick note: Took me a lot longer than I wanted to, but we have finally ported and released cfMesh for blueCFD-Core 2016 and 2017. Instructions are given here: https://github.com/blueCFD/Core/wiki...h-blueCFD-Core

December 12, 2016, 04:33	CFMesh for blue core CFD	#1
naveen.hariprasad New Member naveen Join Date: Nov 2016 Posts: 3 Rep Power: 9	Hello everyone, I am Naveen Hariprasad, a new user of OpenFOAM. I am running OpenFOAM on my windows 10 machine. I chose blue core CFD terminal to run OpenFOAM and it works fine. I have chosen CfMesh as the meshing application for OpenFOAM. I tried installing cfMesh inside the blue core terminal. However, I ended up with lot of errors. I followed the instruction for installing cfMesh inside the blue core CFD terminal. Later, when observed, it was found that the cfMesh utility in blue core CFD is developed only OpenFOAM version 2.3. I have installed OpenFOAM version 4.x in the blue core CFD and the cfMesh for this version is not yet developed. I am not sure if this is the exact cause of the problem. I would request some comments/inputs from people who have faced a similar problem. Thank you, Naveen Hariprasad

December 13, 2016, 16:27		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick answer: I've created a task for this here: https://github.com/blueCFD/Core/issues/37 - namely to bring the latest cfMesh to build with blueCFD-Core 2016. I'll try to take care of this next weekend. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

March 4, 2018, 16:11		#3
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick note: Took me a lot longer than I wanted to, but we have finally ported and released cfMesh for blueCFD-Core 2016 and 2017. Instructions are given here: https://github.com/blueCFD/Core/wiki...h-blueCFD-Core __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is better for CFD 4 core i7-2600 or AMD 8 core FX-8150?	GregShaffer	Hardware	3	May 7, 2015 13:26
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	August 21, 2000 04:49
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44